Metal Painting
Ensure strength, longevity, and style with precision applied metal coatings from industrial steel to decorative ironwork.
Metal Painting
01
Surface Preparation
-
Degreasing: Remove oil, grease, and surface contaminants with industrial degreasers.
-
Rust Removal: Use sandblasting, mechanical abrasion, or rust converters on corroded areas.
-
Smoothing: Grind rough welds and clean edges for even application.
-
Drying: Ensure the surface is dry and dust-free.
02
Primer Application
-
Product: (e.g., Dulux Metalshield® Etch Primer)
-
Purpose: Promotes strong adhesion and corrosion resistance on bare or galvanized metal.
-
Method: Spray or brush for full coverage, focusing on joints and crevices.
-
Drying Time: Touch dry in 30–60 minutes.
03
Base Coat / Intermediate Layer
-
Product: (e.g., Dulux Metalshield® Epoxy Enamel, Dulux Luxaprime® Steel Prime)
-
Features:
-
Excellent anti-corrosive protection
-
Available in industrial or decorative finishes
-
Heat and chemical resistance for demanding environments
-
Application: Use spray or brush/roller depending on surface detail.
-
Drying: Allow 4–6 hours before next coat.
04
Topcoat Application
-
Product: (e.g., Dulux Metalshield® Topcoat)
-
Purpose: Enhances weather, UV, and impact resistance while providing gloss or satin finish.
-
Custom Finish: Optional hammer tone, matte, or metallic textures available.
-
Curing: Full cure in 7 days for maximum durability.
05
Pro Tips
-
For ornate railings or staircases, use small-detail brushes for coverage in scrollwork.
-
Apply in low-humidity, shaded conditions to avoid blistering.
-
Use appropriate PPE and ventilation during application.